Vermont-casting 3405BGW Bedienungsanleitung

Assembly and Owner’s ManualRead all of these instructions and keep them in a safe place for future reference.Leave these instructions with the consume

Hardware:Tools needed:Assembly Step 5Locate these parts:Phillips HeadScrewdriver3/8”Wrench1. Turn the smoker upright.2. Set the damper plate on top of

Hardware:Tools needed:Assembly Step 6Phillips HeadScrewdriver7/16”Wrench1. Line up the carry handle with the correspondingholes on the side of the cab

Assembly Step 712No tools or hardware are required for this step.1. Insert the wood box rack into the bottom of the smoker. Thefeet of the rack sit in

Assembly Step 813No tools or hardware are required for this step.1. Slide the water pan into the bottom rack position as shown.2. Insert the cooking g

Tools needed:Phillips HeadScrewdriverAssembly Step 9Locate these parts:1. Slide the handle washer onto the endof the door handle, followed by thehandl

15No tools are required for this step.1. Insert the name plate mounts and heat indicatorprong through the mounting holes in the front of thedoor panel

Tools needed:Assembly Step 1116Locate these parts:HARDWARE BAGGPliersZip TieORUsing the zip tie, secure the hose tothe front leg as shown. Do not pull

1712345The instructions stated on gas cylinder tanks have to be followed when filling or transportingtanks. Failure to do so could result in problems

18LP TankNot IncludedCylinders must be filled before initial use. All handling, transport, filling and storage of LP gas cylinders must be inaccordanc

11Operating InstructionsPre-Use Procedures Your smoker has been packaged with a retail store level point-of-purchase label that hangs on the front of

Congratulations and thank you for your purchaseof your new Great Outdoors smoker. We are pleasedthat you have recognized the value of the design,funct

Adding Wood / Charcoal To add wood chips before cooking, simply fill the wood chip box with your choice of flavoring hardwood chips. The amount and ty

21Lighting ProcedureIgniter Lighting System:Match Lighting:1. Check all connections for leaks using the “soapy water”test as explained on page 16.2. O

3continued...DO NOT use this smoker in a manner other than its intended purpose. It is NOT intended for commercial use. It is NOTintended to be instal

4Use caution when opening the door of the smoker while in operation. Keep hands, face, and body safe from hot steam orflare-ups. Protect your nose and

Assembly Step 1 - Identifying the partsCheck your package contents for these parts. If you are missing any parts, or if anyparts are damaged, please c

Assembly Step 1 - ContinuedCheck your package contents for these parts. If you are missing any parts, or if anyparts are damaged, please call our toll

Hardware:Tools needed:Assembly Step 27HARDWARE BAGPhillips HeadScrewdriver1. Set the cabinet assembly top side down.2.3. DO NOT yet insert the two bol

Hardware:Tools needed:Assembly Step 3Locate these parts:Phillips HeadScrewdriver1. Place the Control Panel Assembly betweenthe front legs as shown. Th

Hardware:Tools needed:Assembly Step 4Locate these parts:Phillips HeadScrewdriver1. Set the burner assembly onto the cabinet asshown. IMPORTANT: The bu